CPSN-AI-1208LI
These modules provide various expanded I/O interfaces to the coupler units.
Model | Input Format*1 | No. of Input Channels | Voltage Input*1 | Input Current*1*2 | Power Consumption | Connector |
---|---|---|---|---|---|---|
Single-end input or differential input |
8ch (single-end input) 4ch (differential input) |
±10V,±5V, ±2.5V, 0 to 10V, 12bit, Bus isolated |
±±20mA 12bit, (Bus isolated) |
1.4W | Screw terminal block (2 pieces 3.81mm/0.15″ pitch 10-pin) |
|
±10V,±5V, ±2.5V, 0 to 10V, 0 to 5V 24bit, Bus isolated |
±20mA, 0 to 20mA, 24bit, bus isolation |
1W |
Model | Output Format | Ch / Isolation | Resolution | Output Range | Voltage Current Output Range | Power Consumption | Connector |
---|---|---|---|---|---|---|---|
Voltage/current output | 2ch / Inter-channel isolation | 16bit | ±10V, ±5V, 0 to 10V, 0 to 5V | 0 to 20mA | 2.1W | Screw terminal block (2 pieces 3.81mm/0.15″ pitch 10-pin) |
Model | Input Format | No. of CH / Isolation | Supported Sensors | Power Consumption | Connector |
---|---|---|---|---|---|
Differential input | 4ch / bus isolation | Thermocouple J, K, E, N, R, S, T |
1.1W | Screw terminal block (2 pieces 3.81mm/0.15″ pitch 10-pin) |
Model | Input | Output | Power Consumption | Connector |
---|---|---|---|---|
8ch Opto-coupler isolated input Supports current sink (negative logic) or source (positive logic) output |
— | 0.3W | Screw terminal block (2 pieces 3.81mm/0.15″ pitch 10-pin) |
|
8ch Opto-coupler isolated input Supports current sink output (negative logic) |
— | 0.9W | ||
16ch Opto-coupler isolated input (Supports current sink (negative logic) or source (positive logic) output) with simple counter function |
— | 1.3W | MIL connector(20-pin) | |
— | 8ch Opto-coupler isolated open collector output (current sink type) (negative logic) |
0.4W | Screw terminal block (2 pieces 3.81mm/0.15″ pitch 10-pin) |
|
— | 8ch Opto-coupler isolated open collector output (current sink type) (negative logic) |
1.2W | ||
— | 8ch Opto-coupler isolated output (current source output)(positive logic) |
0.3W | ||
— | 8ch Opto-coupler isolated output (current source output)(positive logic) |
1.2W | ||
— | 16ch Opto-coupler isolated open collector output (current sink type) (negative logic) |
0.5W | MIL connector(20-pin) | |
— | 16ch Opto-coupler isolated open collector output (current sink type) (negative logic) |
0.5W | ||
Bi-Directional: 8ch (shared inputs and outputs) Input: Opto-coupler isolated input(supports current sink output)(negative logic) Output: Opto-coupler isolated open-collector outputs (current sink type) (negative logic) |
0.3W | Screw terminal block (2 pieces 3.81mm/0.15″ pitch 10-pin) |
Not sure which product to choose? See this simple explanation that covers everything from terminology to the characteristics of interface circuits!
Model | Input | Output | Power Consumption | Connector |
---|---|---|---|---|
![]() CPSN-RRY-4PCA
|
— | 4ch relay contacts (Form A) output | 1.2W | Screw terminal block (2 pieces 3.81mm/0.15″ pitch 10-pin) |
Model | Input | Output | Power Consumption | Connector |
---|---|---|---|---|
![]() CPSN-CNT-3201I
|
Phase-A/UP 1ch Phase-B/DOWN 1ch Phase-Z/CLR 1ch General-purpose input signals 1ch Opto-coupler isolated input |
Match signal output 1ch Opto-coupler isolated open collector output |
0.4W | Screw terminal block (2 pieces 3.81mm/0.15″ pitch 10-pin) |
Model | Transmission Scheme | No. of CH / Isolation | Power Consumption | Connector |
---|---|---|---|---|
![]() CPSN-COM-1PD
|
Asynchronous serial transmission (Full duplex / Half duplex) |
1ch / Bus isolated | 1.7W | Screw terminal block (2 pieces 3.81mm/0.15″ pitch 10-pin) |
Model | Rated Voltage Input Range | Rated Output Voltage | Rated Output Current | Supplied Power |
---|---|---|---|---|
![]() CPS-PWD-30AW24-01
|
100 to 240V(50 to 60Hz) | 24VDC | 1.3A(Max.) | 30W |
![]() CPS-PWD-90AW24-01
|
100 to 240V(50 to 60Hz) | 24VDC | 3.8A(Max.) | 90W |