The resistive coupling element is used to monitor open and short circuits in isolator amplifier circuits controlled by mechanical contacts. The coupling element is installed directly to the control contact or inside its terminal box.
Numerous isolator amplifiers can monitor the connected sensor line for open or short circuit conditions thanks to the employment of electronic proximity switches to which current can be applied in both damped and undamped status DIN EN 60947-5-6. Current values outside the specified range are identified as open or short circuits.
If simple mechanical contacts are used, it is not possible to identify a short circuit. Neither can be distinguished between open circuit and open contact. This problem can be solved by installing a resistor combination at the end of the sensor line immediately before the switch. This combination provides a closedcircuit current even when the contacts is open. At closed contact it restricts the current to a value which lies clearly below the response threhold for short circuit.
Four states can be detected:
|Installation||Mounting rail TH 35|
|Storage temperature||-40 °C up to +60 °C|
|Voltage||max. DC 20 V|
|Resistance||1 kΩ/0.6 W
10 kΩ/0.6 W
*Refer to the documentation for more detailed information
EQUVERA RESPONDS TO COVID 19. CHECK OUR OUR PRODUCTS PAGE. Dismiss